Brake Rotor, Removing And Installing, 1LA, 1LB, 1LJ And 1LD 1ZT + S4 /S5: Installing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Clean the brake rotor, wheel hub and contact surfaces before installing.
-- Place the brake rotor on the wheel hub.
NOTE:
When positioning the brake rotor, do not tilt it on the wheel hub.
-- Install the securing bolt -arrow- and tighten.
-- Install the brake caliper with the brake pads and front brake carrier. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, 1LA, 1LB, 1LJ AND 1LD 1ZT + S4 /S5 .
-- Install The Wheels.
Wheel bolt tightening specification. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .