Brake Caliper, Removing And Installing, 1LT And 1LY: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1332 40-200 Nm :VAG1332
- Torque Wrench 1332 Insert - Reversible Ratchet:VAG1332/1
-- Raise The Vehicle.
-- Remove the wheels.
-- Remove the brake hose from the bracket.
-- Disconnect the brake wear indicator on the left brake caliper.
-- Remove the bolts -5- from the brake carrier.
-- Remove the brake carrier with brake pads and the brake caliper.
Do not let the brake caliper with the brake carrier hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.
WARNING:
Do not press the brake pedal when the brake caliper is removed.