Brake Caliper, Removing And Installing, 1LA, 1LB, 1LJ And 1LD 1ZT + S4 /S5: Installing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Clean Bolts Before Reusing
Replace Damaged Bolts
Always replace self-locking bolts.
-- Carefully press the brake caliper with the brake carrier and the installed brake pads over the brake rotor.
-- Tighten the brake carrier with bolts -1-.
-- Insert the brake hose in the bracket -4-.
-- Insert the wire in the bracket -2- and lock it to the right -B-.
-- Install The Wheels.
Wheel bolt tightening specification. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .
-- Lower The Vehicle.