Valve Stem Seals With Removed Cylinder Head, Removing And Installing: Assembling
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusters.
-- Install the camshafts. Refer to CAMSHAFT, REMOVING AND INSTALLING .