Valve Stem Seals With Installed Cylinder Head, Removing And Installing: Removing: Assembling
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusters.
-- Install the camshafts. Refer to CAMSHAFT, REMOVING AND INSTALLING .
-- Install the Ignition Coils with Power Output Stages --. Refer to Ignition Coils with Power Output Stages --, REMOVING AND INSTALLING .