Tightening The High Pressure Lines On The Injector Units With A 17 Mm Wrench.

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fastening High-Pressure Line At High Pressure Pump Using Torque Wrench V.A.G 1331 With Ratchet V.A.G 1331/1 And Socket 17 Mm T40055

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the union nuts for the high-pressure lines by hand.

-- Make sure the high-pressure lines are seated free of stress.

-- Tighten the high pressure lines on the injectors using the Torque Wrench 1331 5-50Nm:VAG1331 with Torque Wrench 1331 Insert - Reversible Ratchet:VAG1331/1 and Union Nut Socket:T40055 .

Tightening specification: 28 Nm