LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1290 (Cylinder Head, VALVETRAIN [CATA]) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head Cover, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Component Nm
Cylinder head cover to cylinder head 9
Injector to cylinder head 10
Injector cover to cylinder head 5.5
High-pressure lines 28
Wiring harness bracket to cylinder head 9
Intake tube bracket to cylinder head 9
Throttle Valve Control Module -J338- with intake tube to Intake Manifold 9
Bracket 9
Connecting pipe for mechanical EGR valve 9
Hose clamps 13 mm wide: 5.5