Overview - Right Camshaft Timing Chain
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification. Refer to -item 2- OVERVIEW - TIMING MECHANISM DRIVE CHAIN .
- Mounting Pin
- For the drive chain sprocket
- Right Camshaft Timing Chain
- Remove from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFT .
- Before removing, mark the direction of rotation with paint
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Camshaft Chain Sprocket
- For the intake camshaft
- Installation position: the side with the writing on it faces forward
- Bolt
- 23 Nm
- Chain Tensioner
- For the right camshaft timing chain
- Bolt
- 5 Nm + 90° (1 /4 turn) additional turn
- Replace
- Quantity: 3
- Thrust Washer
- For the drive chain sprocket
- Drive Chain Sprocket
- For the right camshaft timing chain