High Pressure Pump Drive Chain Sprocket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the high pressure pump. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .

-- Remove the intake camshaft adjuster -1-. Refer to CAMSHAFT ADJUSTER, REMOVING AND INSTALLING .

Fig 1: Coating Drive Shaft With Clean Engine Oil

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -3- from the glide track.

-- Remove the camshaft timing chain from the drive chain sprocket.

-- Pull out bearing shaft -4- and remove drive chain sprocket -6-.