Supercharger, Securing To Engine/Transmission Holder For Leak Test: Procedure

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Supercharger removed. Refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Insert the Gearbox Support:T40206 with Gearbox Support:T40206/1 in the Engine and Gearbox Bracket:VAS6095A .

Fig 1: Securing Supercharger To VAS 6095

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the supercharger on the transmission holder as shown. For the bolted connections -1-, use the holes "1", "4", "9", "11" and "13".

-- Attach the Gearbox Support Supplement:T40206/2 directly to the supercharger housing at the right front using the bolt -2-.

Installation Position of the Gearbox Support SupplementT40206/2

Fig 2: Attaching Gearbox Support Supplement T40206/2 To Compressor Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The seals on the supports seal off the openings in the supercharger housing.