Crankshaft Needle Bearing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- Engine with transmission removed and electro-drive drive motor removed from the engine. Refer to ENGINE, REMOVING AND INSTALLING .
-- Remove the clutch. Refer to CLUTCH, REMOVING AND INSTALLING [For transmission(s) 0C8] .
-- Remove the needle bearing using a commercially available internal puller, for example Puller - Kukko Internal - 12-16mm:21/2 and a counter-support, for example Puller - Kukko Counterstay:22/1 -A-.