Rear Center Belt Anchor, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the 2/3 seat bench. Refer to BENCH SEATS, REMOVING AND INSTALLING .

-- Remove the 2/3 backrest. Refer to REAR SEATS, REMOVING AND INSTALLING .

-- Remove the bolt -4- and install the clamping pins -1- and -3- into the backrest frame with a drift.

Fig 1: Identifying Rear Center Belt Anchor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully remove the belt guide -2- from the console.