LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1241 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Crash Sensors >> Rear Side Airbag Crash Sensor On Front Passenger Side -G257-, Removing And Installing

Rear Side Airbag Crash Sensor On Front Passenger Side -G257-, Removing And Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Passenger Side Rear Side Airbag Crash Sensor - G257- is installed on the front passenger side in front of the rear wheel housing.

WARNING:

Follow the General Safety Precautions when working with airbags, belt tensioners and battery cut-out units (pyrotechnic components). Refer to AIRBAG, BELT TENSIONER AND BATTERY CUT-OUT UNITS, GENERAL SAFETY PRECAUTIONS .

-- Disconnect the battery. Refer to BATTERY .

Removing and installing the Passenger Side Rear Side Airbag Crash Sensor -G257- is identical to removing and installing the Driver Side Rear Side Airbag Crash Sensor -G256- and the same directions can be used: