General Information
Familiarity with the function and operation of the rearview camera is needed if there are customer concerns.
Refer to Owner's Manual.
Use the Vehicle Diagnostic Tester "Guided Fault Finding" when performing service work or Fault Finding.
When the battery is connected, check the all the vehicle accessories (radio, clock, electronic conveniences, etc.) according to the Service Information and/or the Owner's Manual.
The rearview camera assists the driver during back-up driving by providing the driver with an image of the traffic situation behind the vehicle via the monitor of the radio/navigation system.
The Rearview Camera Consists Of The Following Components:
- The Rearview Camera -R189-,
- The Rearview Camera System Control Module -J772-
- the Radio/Navigation Display Unit Control Module -J503-,
- and steering wheel with Steering Angle Sensor -G85-.
Malfunction Recognition And Malfunction Display:
The rearview camera is equipped with OBD.
The "Guided Fault Finding" function is to be used for troubleshooting of one of the systems described as in service information "Vehicle Diagnosis, Testing and Information System". Refer to VEHICLE DIAGNOSTIC TESTER .