Valve Stem Seals, Cylinder Head Installed, Removing And Installing: Assembling
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Assemble in reverse order of disassembling. Note The Following:
-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.
-- Install the camshafts. Refer to CAMSHAFT, REMOVING AND INSTALLING .
-- Install the spark plugs. Refer to appropriate service information.