Right Timing Chain Cover, Tightening Specifications And Sequence

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sequence Of Right Timing Chain Cover Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Replace the bolts for the right timing chain cover.

-- Tighten bolts in 2 stages in -1 to 8- sequence as follows:

-- Tighten to 5 Nm-- Tighten an additional 90°.