LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1215 (Cylinder Head, VALVETRAIN [CALA] (Coupe)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Left Cylinder Head Cover, Removing And Installing >> Installing

Left Cylinder Head Cover, Removing And Installing: Installing

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Replace The Cylinder Head Seal If It Is Damaged.

Replace the cylinder head cover bolts when replacing the damaged seal.

-- Clean the sealing surfaces. They must be free of oil and grease.

-- Tighten the left cylinder head cover bolts. Refer to Figure.

scientia non olet · About LEMON Manuals