LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1215 (Cylinder Head, VALVETRAIN [CALA] (Coupe)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head, Removing And Installing >> Removing >> Right Cylinder Head:

Right Cylinder Head:

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Slide Unloaded Camshaft Slide As Far As Stop In Direction
GWWA15-10336Courtesy of AUDI OF AMERICA, LLC

-- Slide the unloaded camshaft slider -F- as far as the stop in the direction of the -arrow-.



Fig 1: Identifying Bolt (Right Cylinder Head)
GWWA15-10332Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2-.



Fig 1: Slide Unloaded Camshaft Sliders As Far As The Stop In Direction Of -Arrow-
GWWA15-10334Courtesy of AUDI OF AMERICA, LLC

-- Slide the unloaded camshaft slider -F- as far as the stop in the direction of the -arrow-.



Fig 1: Identifying Bolts -10 Through 16- And Unloaded Camshaft Sliders -D- & -E-
GWWA15-10330Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -10 through 16- while sliding the unloaded camshaft sliders -D- and -E- accordingly.

-- Remove the cylinder head.