Timing Mechanism Drive Chain, Removing And Installing: Removing

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

The transmission is removed.

-- Remove the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft timing chains from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .

-- Remove the power take-off drive chain. Refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .

-- Press the drive chain tensioner guide rail in the direction of the -arrow- and secure the chain tensioner with a Locking Pin:T40071 .

Fig 1: Identifying Bolts And Chain Tensioner

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk Of Destroying Due To Reversed Running Direction On A Used Drive Chain.

Mark the drive chain running direction with arrows using paint for installation later. Do not mark the chain using a punch, notch or similar.

-- Remove the bolts -1- and the guide rail.

-- Remove the bolts -2- and the chain tensioner.

-- Remove the timing mechanism drive chain.