Right Camshaft Timing Chain
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 80 Nm +90° additional turn
- Replace
- Camshaft Adjuster for Exhaust Camshaft
- Identification "Exhaust"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Bolt
- 80 Nm +90° additional turn
- Replace
- Camshaft Adjuster for Intake Camshaft
- Identification "Intake"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Bolt
- 30 Nm + 90° additional turn
- Replace
- Mounting Pin for the Drive Chain Sprocket
- For the right camshaft timing chain
- Asymmetrical version
- Installed position. Refer to Figure
- Right Camshaft Timing Chain Drive Sprocket
- Installed position. Refer to Figure
- Right Camshaft Timing Chain
- Before removing, mark the direction of rotation with paint
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Drive Chain Sprocket Thrust Washer
- For the right camshaft timing chain
- Asymmetrical version
- Installed position. Refer to Figure
- Right Camshaft Timing Chain Tensioner
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Glide
- Bolt
- 9 Nm