Left Camshaft Timing Chain

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Camshaft Timing Chains Assembly

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 80 Nm +90° additional turn
- Replace
Bolt
- 80 Nm +90° additional turn
- Replace
Camshaft Adjuster for Exhaust Camshaft
- Identification "Exhaust"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Camshaft Adjuster for Intake Camshaft
- Identification "Intake"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Left Camshaft Timing Chain
- Before removing, mark the direction of rotation with paint
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Bolt
- 9 Nm
Glide
Left Camshaft Timing Chain Tensioner
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Mounting Bracket for Drive Sprocket
Bolt
- 8 Nm + 45° additional turn
- Replace
Left Camshaft Timing Chain Drive Sprocket
Drive Chain Sprocket Thrust Washer
Bolt
- 6 Nm + 60° additional turn
- Replace