SUBFRAME, Servicing, Rear Bonded Rubber Bushing For Rear Final Drive, All Wheel Drive (AWD) Vehicles: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear final drive. Refer To GENERAL, TECHNICAL DATA - REAR FINAL DRIVE 0BC (COUPE) .

-- Attach the tools to the subframe as illustrated.

Fig 1: Attach Tools To Sub Frame As Illustrated

Courtesy of AUDI OF AMERICA, LLC

:T40185/1 . Side "A" must face the subframe.
:3301
:3346/3
:T40185/9
Subframe
Bonded rubber bushing
:T40185/7 . The "open" side faces up.

-- Remove the bearing from the subframe while turning at the :3346/3 and counter-holding at the :T40185/9 .