LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1202 (Cylinder Head, VALVETRAIN [CFSA] (Coupe)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Overview - Cylinder Head >> Left Cylinder Head Cover - Tightening Specification And Sequence

Left Cylinder Head Cover - Tightening Specification And Sequence

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Left Cylinder Head Cover Bolts Removal Sequence
GWWA15-10232Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts to 9 Nm  in the following sequence: -1 to 15-.

scientia non olet · About LEMON Manuals