Camshaft Timing Chain, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Engine/Transmission Subassembly Removed; Engine And Transmission Separated. Refer To ENGINE AND TRANSMISSION, SEPARATING .
Engine secured with Scissor Lift Table - Q7 Set Articulated Joint Support:VAS6131/13-7 .

-- Remove The Lower Timing Chain Cover. Refer To LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove The Camshaft Timing Chains From The Camshafts. Refer To CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .

CAUTION:

If The Running Direction Is Reversed On A Used Camshaft Timing Chain, It Could Be Damaged.

Paint Arrows To Mark The Timing Chain Running Direction So It Can Be Installed Again.

-- Remove Bolts -1 And 2- And Remove The Left Chain Tension And Left Camshaft Timing Chain.

Fig 1: Identifying Bolts For Left Chain Tensioner And Left Camshaft Timing Chain

Courtesy of AUDI OF AMERICA, LLC

-- Remove Bolts -1 And 2- And Remove The Right Chain Tension And Right Camshaft Timing Chain.

Fig 2: Identifying Bolts For Right Chain Tensioner And Right Camshaft Timing Chain

Courtesy of AUDI OF AMERICA, LLC