Ribbed Belt TENSIONER, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following :

Tightening Specification. Refer to OVERVIEW - RIBBED BELT DRIVE .

-- Position The Ribbed Belt Tensioning Damper With The Thrust Washer On The Oil Pan Upper Section And Tighten It.

-- Install The Ribbed Belt. Refer To RIBBED BELT, REMOVING AND INSTALLING .

-- Install The Cooler With The Fan Shroud. Refer To RADIATOR, REMOVING AND INSTALLING .