Baffle Plate - Tightening Specifications And Sequence
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of AUDI OF AMERICA, LLC
NOTE:
Replace any bolts that were tightened with an additional turn.
-- Tighten the bolts in two steps in the sequence shown.
| Step |
Bolts |
Tightening Specification/Additional Turn |
| 1. |
-1 to 6- |
5 Nm |
| 2. |
-1 to 6- |
Tighten an additional 90° |