Allocation Of Crankshaft Bearing Shells For Cylinder Block
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Bearing shells with the correct thickness are allocated to the cylinder block in the factory. Colored dots on sides of bearing shells serve for identifying bearing shell thickness.
- Allocation of bearing shells to cylinder block is marked by a letter on the respective bearing on guide frame
| Letter on guide frame | Color of bearing | |
|---|---|---|
| R | = | red |
| G | = | yellow |
| B | = | Blue |
| S | = | Black |