MULTIFUNCTION Buttons, 3-Spoke Steering Wheel, Removing And Installing, From My 2012: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Install In Reverse Order Of Removal, Noting The Following:

-- Mount the trim, with the multifunction buttons installed, on the steering wheel.

-- Route the connection cable for the tiptronic switch -2- as illustrated.

Fig 1: Be Careful Of Connectors To Tiptronic Switches

Courtesy of AUDI OF AMERICA, LLC

-- Route the rest of the connection cable, including the connector, into the guides inside the steering wheel.

-- Press the trim -2- with the multifunction button onto the steering wheel -1- until it audibly engages.

Fig 2: Locating Trim With Multifunction Buttons

Courtesy of AUDI OF AMERICA, LLC

-- Make sure the wires are routed correctly in the steering wheel.