Measuring Cylinder Bore
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Using the Cylinder Dial Bore Gauge:VAS6078 measure in a diagonal sequence at three positions transversely -A- and longitudinally -B-.
- Maximum deviation from nominal dimension: 0.08 mm.
| Cylinder Bore Diameter in mm | |
|---|---|
| Manufacturing stage I nominal size | 84.510 ± 0.005 |
| Manufacturing stage II nominal size | 84.610 ± 0.005 |