Crankshaft, Measuring Axial Clearance: Procedure
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Attaching Dial Indicator VAS 6079 Together With Dial Gauge Holder VW 387 To Cylinder Block And Setting Indicator Against Crankshaft Counterweight
-- Install the :VAS6079 with the :VW387 on the cylinder block as shown in the illustration.
-- Place The Dial Gauge Against The Crankshaft Counterweight.
-- Press The Crankshaft Against The Dial Gauge By Hand And Set The Gauge To "0".
-- Press The Crankshaft Off The Dial Gauge And Read The Measurement.
- Axial Clearance: 0.090 to 0.251 mm.