Valve Stem Seals With Cylinder Head Installed, Replacing: Assembling
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.
-- Install the spark plugs. Refer to appropriate service information.
-- Install the camshafts. Refer to CAMSHAFT, REMOVING AND INSTALLING .