LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1171 (Cylinder Head, VALVETRAIN [CAUA] (Coupe)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Overview - VALVETRAIN >> -- Tighten The Bolts In Three Steps And In The Sequence Shown:

-- Tighten The Bolts In Three Steps And In The Sequence Shown:

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Step Bolts Tightening Specification/Additional Turn
1. -1 to 24- Install all the way in by hand.
  • The guide frame must touch the entire contact surface on the cylinder head.
2. -1 to 24- 8 Nm
3. -1 to 24- Tighten an additional 90°
scientia non olet · About LEMON Manuals