Special Tools
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Spark Plug Removal Tool:3122B
- Puller - Valve Seal:3364
- Seal Installer - Valve Stem:3365
- Valve Cotter Tool Kit:VAS5161 with Valve Cotter Tool Kit - Guide Plate 19c:VAS5161/19C
- Valve Cotter Tool Kit - Adapter:T40012
Special Tools And Workshop Equipment Required
- Crankshaft Holder:3242
- Torque Wrench 1332 40-200Nm:VAG1332
- Torque Wrench 1332 Insert - Open Ring Wrench - 24mm:VAG1332/9
- Camshaft Clamp:T40070 (quantity: 2)
- Locking Pin:T40071 (quantity: 2)
- Camshaft Adjuster Key:T40079
Special Tools And Workshop Equipment Required
- Puller - Valve Seal:3364
- Seal Installer - Valve Stem:3365
- Valve Cotter Tool Kit:VAS5161 with Valve Cotter Tool Kit - Guide Plate 19c:VAS5161/19C
- Engine And Transmission Holder:VAS6095
- Cylinder Head Tensioning Device:VAS6419
Special Tools And Workshop Equipment Required
- Spark Plug Removal Tool:3122B
- Compression Tester Kit:VAG1763
- Puller - Ignition Coil:T40039
Special Tools And Workshop Equipment Required
- Used Oil Collection and Extraction Unit:SMN372500
- Multipoint Socket:T10035
- Injector/Combustion Chamber Seal Tool Set:T10133B
- Locating Pins:T40116
- Crankshaft Turning Tool :T40257
- Wrench - 21mm:T40263
- Dial Gauge - 0-10mm:VAS6079
- Dial Gauge Holder:VW387