LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1171 (Cylinder Head, VALVETRAIN [CAUA] (Coupe)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head Cover, Removing And Installing >> Right Cylinder Head Cover, Removing And Installing >> Installing

Right Cylinder Head Cover, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

NOTE:

Replace The Cylinder Head Cover Gasket If It Is Damaged.

Replace the cylinder head cover bolts when replacing the damaged gasket.

Secure all hose connections with hose clamps that match the ones used in series production.

-- Clean the sealing surfaces. They must be free of oil and grease.

-- Tighten the right cylinder head cover bolts. Refer to Figure.

scientia non olet · About LEMON Manuals