Left Camshaft Timing Chain
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Camshaft Adjuster for Exhaust Camshaft
- Identification "Exhaust"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Bolt
- 80 Nm + 90° turn
- Always replace
- Bolt
- 80 Nm + 90° turn
- Always replace
- Camshaft Adjuster for Intake Camshaft
- Identification "Intake"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Left Camshaft Timing Chain
- Remove from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Before removing, mark the direction of rotation with paint
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Bolt
- 5 Nm + 90° turn
- Always replace
- Glide
- Left Camshaft Timing Chain Tensioner
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Oil Screen
- Set into the chain tensioner
- Observe locating tabs on circumference
- Seal
- Always replace
- Clipped onto the chain tensioner
- Mounting Bracket for Drive Sprocket
- Bolt
- Tightening Specification -item ) OVERVIEW - TIMING MECHANISM DRIVE CHAIN - Bolt.
- Left Camshaft Timing Chain Drive Sprocket
- Drive Chain Sprocket Thrust Washer
- Bolt
- Tightening Specification -item ) OVERVIEW - TIMING MECHANISM DRIVE CHAIN - Bolt.