LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1171 (Cylinder Head, VALVETRAIN [CAUA] (Coupe)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Camshaft Timing Chain, Removing And Installing >> Removing

Camshaft Timing Chain, Removing And Installing: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft timing chains from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .

Fig 1: Identifying Bolts For Left Chain Tensioner And Left Camshaft Timing Chain
GWWA13-10115Courtesy of AUDI OF AMERICA, LLC
CAUTION:

If The Running Direction Is Reversed On A Used Camshaft Timing Chain, It Could Be Damaged.

  • Paint arrows to mark the timing chain running direction so it can be installed again.

-- Remove bolts -1 and 2- and remove the left chain tension and left camshaft timing chain.

-- Remove bolts -1 and 2- and remove the right chain tension and right camshaft timing chain.

Fig 2: Identifying Bolts For Right Chain Tensioner And Right Camshaft Timing Chain
GWWA13-10116Courtesy of AUDI OF AMERICA, LLC