Outer CV Joint, 88 Mm Diameter Or 98 Mm Diameter: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Outer CV Joint, Pressing Off

Courtesy of AUDI OF AMERICA, LLC

-- Secure The Drive Axle With Protective Covers In A Vise Clamp.

-- Open The Clamps.

-- Slide Back Protective Boot.

-- Remove The CV Joint From The Drive Axle Using A Drift -A-.

Drift -A- Must Be Installed Exactly On The Triple Roller Star Of The CV Joint.

-- Remove Joint And Protective Joint Boot.

Fig 2: Circlip

Courtesy of AUDI OF AMERICA, LLC

-- Remove The Circlip -1-.