Outer CV Joint, 88 Mm Diameter Or 100 Mm Diameter: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inserting Pliers 3340 At Back Of Hose Clamp

Courtesy of AUDI OF AMERICA, LLC

-- Secure The Drive Axle With Protective Covers In A Vise Clamp.

-- Open the clamp using :3340 .

Insert The :3340 At The Front Of The Clamp, As Shown In The Illustration.

-- Slide Back Protective Boot.

-- Strike A Copper Or Brass Drift -A- On CV Joint Inner Race With A Hammer.

Fig 2: Hitting Copper Or Brass Mandrel Onto Inner Ring Of Constant Velocity Joint

Courtesy of AUDI OF AMERICA, LLC

-- Remove Joint And Protective Joint Boot.

-- Remove The Circlip.