LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1160 (Cooling System [CFSA] (Coupe)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Overview - Coolant Pump/Thermostat >> After-Run Coolant Pump V51, Tightening Specifications

After-Run Coolant Pump V51, Tightening Specifications

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: After-Run Coolant Pump -V51-, Tightening Specifications
GWWA19-11057Courtesy of AUDI OF AMERICA, LLC

-- Tighten The Bolts -2- On The After-Run Coolant Pump -V51- To 5 Nm  .

NOTE:

The Component Location On The Audi RS4/RS5 Coupe Is Shown Instead.

scientia non olet · About LEMON Manuals