Damaged Crankshaft Or Rod Bearings, Note
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If large quantities of metal particles or abraded material are detected during engine repairs, it may mean the crankshaft or rod bearings are damaged. To prevent damage, perform the following steps after completing the repair: carefully clean the oil channels and replace the oil spray jets, the oil cooler and the oil filter.
Oil capacities, specifications and viscosity classes. Refer to the Fluid Capacity Chart.
Oil injector jet for piston cooling. Refer to Fig 1.