Overview - Impact Absorber, AUDI RS5
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Quantity: 4
- Impact Member Mount
- Removing and installing. Refer to IMPACT ABSORBER MOUNT, REMOVING AND INSTALLING .
- Bolt
- 40 Nm
- Quantity: 4
- Nut
- 17 Nm
- Quantity: 4
- Radio Frequency Controlled Clock Receiver -J489-
- Removing and Installing. Refer to Clock .
- Bolt
- Quantity: 2
- Tightening specification. Refer to Instruments .
- Impact Member
- Removing and installing. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING .