Overview - Bumper Cover, Except AUDI S5 And AUDI RS5
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 3 Nm
- Bolt
- 1.5 Nm
- Bumper Cover End Plate
- Removing and installing. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 => Bumper Cover End Plate .
- Cover
- For the towing hook
- Bumper Cover
- Removing and installing. Refer to BUMPER COVER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Right Front Parking Aid Sensor -G252-
- Removing and Installing. Refer to Parking Aid .
- Radiator Grille
- Removing and installing. Refer to RADIATOR GRILLE, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Bolt
- Tightening specification -item 7- OVERVIEW - RADIATOR GRILLE, EXCEPT AUDI RS5 => List Item:Bolt .
- Lock Carrier Cover
- Removing and installing. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
- Expanding Rivet
- There are different versions. Refer to the Parts Catalog.
- Remove the clamping pin when removing.
- Only press the clamping pin in when installing.
- Impact Absorber
- Removing and installing. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Left Front Parking Aid Sensor -G255-
- Removing and Installing. Refer to Parking Aid .
- Front Bumper Cover Mount
- Removing and installing. Refer to BUMPER GUIDE PIECES, REMOVING AND INSTALLING .
- Bolt
- 4 Nm
- Nut
- 4 Nm
- Fog Lamp
- Removing and Installing. Refer to Fog Lamp .
- Air Intake Grille
- Removing and installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Bolt
- 3 Nm
- Bolt
- 1.5 Nm