Rear Lid Seal, Removing And Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Seal

Courtesy of AUDI OF AMERICA, LLC

Rear Lid
Rear Lid Seal
- To Remove, Remove Seal From Body Flange.
- When Installing, Align The Seal With The Joint -Arrow- Toward The Center Of The Vehicle.
- Beginning At The Seam, Press The Seal All Around Onto The Body Flange.
Body Flange