Gas-Filled Strut, Releasing Gas

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Clamp Gas-Filled Strut In A Vise In Area -x- = 50 mm.

Fig 1: Checking Gas-Filled Strut Clamping Area Dimension

Courtesy of AUDI OF AMERICA, LLC

WARNING:

Clamp Only Within This Area, Otherwise Accident Could Occur!
Wear Protective Eyewear When Sawing.

NOTE:

Cover Area Of Sawn Portion With A Rag To Absorb Oil Spraying Out.

-- Cut Through The Gas-Filled Strut Cylinder Within The First Third Of The Overall Cylinder Length Using The Piston Rod End Of The Cylinder As A Reference Point.