Oil Pan Lower Section, Tightening Specification And Sequence

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting And Free Up Connector -2- From Oil Level Thermal Sensor -G266-

Courtesy of AUDI OF AMERICA, LLC

-- Tight The Lower Oil Pan Bolts -1- In Three Stages As Follows:

Step	Tightening Specification
1.	Install all the way in by hand.
2.	5 Nm diagonally
3.	9 Nm diagonally