Oil Pan Upper Section, Tightening Specifications And Sequence

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Upper Oil Pan Bolts

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace Any Bolts That Were Tightened With An Additional Turn.

-- Tighten the bolts in 3 steps as follows:

Step	Bolts	Tightening Specification
1.	-1 to 7-	Install all the way in by hand.
2.	-1 to 7-	5 Nm diagonally
3.	-1 to 7-	in a diagonal sequence, turn an additional 90°