Section 1141 (MULTIPORT FUEL INJECTION [CFSA] (1 Of 2) (COUPE))
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- 24 MULTIPORT Fuel Injection
- General Information
- Description And Operation
- Fuel Injection System Component Location
- Notes
- Component Location Engine Control Module (ECM)J623
- Installation Location Fuel Pump (FP) Control MODULEJ538
- Installed Location Of The Accelerator Pedal Module With Accelerator Pedal Position SENSORG79 / Accelerator Pedal Position Sensor 2G185
- Installed Location Of Air Pump MOTORV101 / Air Pump Motor 2V189
- Location After-Run Coolant PUMPV51
- Installation Location Oil Pressure Regulation VALVEN428
- Vacuum System Overview
- Air Filter Housing Overview
- Upper Intake Manifold Overview
- Lower Intake Manifold, Fuel Rail And Fuel Injectors Overview
- High Pressure Pump Overview
- Oxygen Sensors Overview
- Fuel Injection System Component Location
- Specifications
- Diagnosis And Testing
- Removal And Installation
- Engine Cover
- Air Filter
- Air Filter Housing
- Throttle Valve Control Module -J338- / Throttle Valve Control Module 2 -J544-
- Upper Intake Manifold
- Lower Intake Manifold With Fuel Rail
- High Pressure Pump
- High Pressure Line
- Fuel Injectors
- TEFLON® Combustion Chamber Seal
- Fuel Pressure Sensor -G247- AND Fuel Pressure Sensor 2 -G624-
- Heated Oxygen Sensors
- Engine Control Module -J623-
- Special Tools