LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1138 (Maintenance, Diagnosis (Maintenance Procedures) (Coupe)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Windshield Washer System, Checking And Adjusting Spray Nozzles >> Windshield Spray Nozzles, Adjusting

Windshield Spray Nozzles, Adjusting

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Unlock the long cover -1- on the wiper spray nozzle adjusting tool:T40187  -arrow A- and push it toward the rear -arrow B-.

Fig 1: Identifying T40187
GWWA92-10198Courtesy of AUDI OF AMERICA, LLC

-- Mount the adjusting pin -2- on the spray nozzle -arrow- in the nozzle unit -1- and make a mark the positions on the windshield.

Fig 2: Place Adjusting Pin -2- On Respective Nozzle -Arrow- Of Nozzle Unit -1
GWWA92-10199Courtesy of AUDI OF AMERICA, LLC

-- If the spray field does not conform the to specifications, then clean the spray nozzle. Refer to .