LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1138 (Maintenance, Diagnosis (Maintenance Procedures) (Coupe)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Vehicle Tester, Connecting

Vehicle Tester, Connecting

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Always secure the testing and measuring equipment on the rear seat when performing a road test.
  • Drivers must NEVER operate these tools while driving.

Special Tools And Workshop Equipment Required 

NOTE:

Make Sure The Selected Vehicle Diagnostic Tester Is Only Used With The Accompanying Diagnostic Cable.

Perform The Following Procedure: 

Fig 3: Identifying Diagnostic Cable Connector
GWWA00-10970Courtesy of AUDI OF AMERICA, LLC

-- Connect the diagnostic cable connector to the diagnostic connection.

-- Turn on the vehicle diagnostic tester.

-- Turn on the ignition.

-- Follow the menu on the screen to start the desired function.