Version 2 Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING .

-- Remove the connector -1- for the heated oxygen sensor -G39- from the retainer.

Fig 1: Heated Oxygen Sensor -G39-

GWWA24-11099

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -2 through 4-.

-- Unlock the connector -1 through 4- disconnect all connectors in -direction of arrow- from the ignition coils.

Fig 2: Disconnecting Ignition Coils Connectors

GWWA24-11208

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -arrows- from the ignition coils.

Fig 3: Identifying Ignition Coil Stage Bolts

GWWA24-11209

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ignition coils carefully.

NOTE:

Note The Installed Position Of Ignition Coils With Power Output Stages.

Be careful to not kink or damage the wiring.

-- Remove spark plugs using spark plug wrench:VAS 3122B .